Dispatch now writes the full serialised DeckyConfig into
DeckyShard.decky_config (plus decky_ip as a cheap extract), so the
master can render the same rich per-decky card the local-fleet view
uses — hostname, distro, archetype, service_config, mutate_interval,
last_mutated — without round-tripping to the worker on every page
render. DeckyShardView gains the corresponding fields; the repository
flattens the snapshot at read time. Pre-migration rows keep working
(fields fall through as None/defaults).
Columns are additive + nullable so SQLModel.metadata.create_all handles
the change on both SQLite and MySQL. Backfill happens organically on
the next dispatch or (in a follow-up) agent heartbeat.
The reaper was being SIGTERM'd mid-rm because `start_new_session=True`
only forks a new POSIX session — it does not escape decnet-agent.service's
cgroup. When the reaper ran `systemctl stop decnet-agent`, systemd
tore down the whole cgroup (reaper included) before `rm -rf /opt/decnet*`
finished, leaving the install on disk.
Spawn the reaper via `systemd-run --collect --unit decnet-reaper-<pid>`
so it runs in a fresh transient scope, outside the agent unit. Falls
back to bare Popen for non-systemd hosts.
Decommissioning a worker from the dashboard (or swarm controller) now
asks the agent to wipe its own install before the master forgets it.
The agent stops decky containers + every decnet-* systemd unit, then
deletes /opt/decnet*, /etc/systemd/system/decnet-*, /var/lib/decnet/*,
and /usr/local/bin/decnet*. Logs under /var/log are preserved.
The reaper runs as a detached /tmp script (start_new_session=True) so
it survives the agent process being killed. Self-destruct dispatch is
best-effort — a dead worker doesn't block master-side cleanup.
Teardowns were synchronous all the way through: POST blocked on the
worker's docker-compose-down cycle (seconds to minutes), the frontend
locked tearingDown to a single string so only one button could be armed
at a time, and operators couldn't queue a second teardown until the
first returned. On a flaky worker that meant staring at a spinner for
the whole RTT.
Backend: POST /swarm/hosts/{uuid}/teardown returns 202 the instant the
request is validated. Affected shards flip to state='tearing_down'
synchronously before the response so the UI reflects progress
immediately, then the actual AgentClient call + DB cleanup run in an
asyncio.create_task (tracked in a module-level set to survive GC and
to be drainable by tests). On failure the shard flips to
'teardown_failed' with the error recorded — nothing is re-raised,
since there's no caller to catch it.
Frontend: swap tearingDown / decommissioning from 'string | null' to
'Set<string>'. Each button tracks its own in-flight state; the poll
loop picks up the final shard state from the backend. Multiple
teardowns can now be queued without blocking each other.
Submitting an INI with a single [decky1] was silently redeploying the
deckies from the *previous* deploy too. POST /deckies/deploy merged the
new INI into the stored DecnetConfig by name, so a 1-decky INI on top of
a prior 3-decky run still pushed 3 deckies to the worker. Those stale
decky2/decky3 kept their old IPs, collided on the parent NIC, and the
agent failed with 'Address already in use' — the deploy the operator
never asked for.
The INI is the source of truth for which deckies exist this deploy.
Full replace: config.deckies = list(new_decky_configs). Operators who
want to add more deckies should list them all in the INI.
Update the deploy-limit test to reflect the new replace semantics, and
add a regression test asserting prior state is dropped.
Teardown and Decommission buttons were silently dead in the browser.
Root cause: every handler started with 'if (!window.confirm(...)) return;'
and browsers permanently disable confirm() for a tab once the user ticks
'Prevent this page from creating additional dialogs'. That returns false
with no UI, the handler early-exits, and no request is ever fired — no
network traffic, no console error, no backend activity.
Swap to an inline two-click pattern: first click arms the button (label
flips to 'Click again to confirm', resets after 4s); second click within
the window commits. Same safety against misclicks, zero dependency on
browser-native dialog primitives.
docker compose up is partial-success-friendly — a build failure on one
service doesn't roll back the others. But the master was catching the
agent's 500 and tagging every decky in the shard as 'failed' with the
same error message. From the UI that looked like all three deckies died
even though two were live on the worker.
On dispatch exception, probe the agent's /status to learn which deckies
actually have running containers, and upsert per-decky state accordingly.
Only fall back to marking the whole shard failed if the status probe
itself is unreachable.
Enhance agent.executor.status() to include a 'runtime' map keyed by
decky name with per-service container state, so the master has something
concrete to consult.
Two compounding root causes produced the recurring 'Address already in use'
error on redeploy:
1. _ensure_network only compared driver+name; if a prior deploy's IPAM
pool drifted (different subnet/gateway/range), Docker kept handing out
addresses from the old pool and raced the real LAN. Now also compares
Subnet/Gateway/IPRange and rebuilds on drift.
2. A prior half-failed 'up' could leave containers still holding the IPs
and ports the new run wants. Run 'compose down --remove-orphans' as a
best-effort pre-up cleanup so IPAM starts from a clean state.
Also surface docker compose stderr to the structured log on failure so
the agent's journal captures Docker's actual message (which IP, which
port) instead of just the exit code.
Operators want to know what address to poke when triaging a swarm decky;
the compose-hash column was debug scaffolding that never paid off.
DeckyShard has no IP column (the deploy-time IP lives on DecnetConfig),
so the list endpoint resolves it at read time by joining shards against
the stored deployment state by decky_name. Missing lookups render as "—"
rather than erroring — the list stays useful even after a master restart
that hasn't persisted a config yet.
The nested list-comp `[f"{id}-{svc}" for svc in [d.services for d ...]]`
iterated over a list of lists, so `svc` was the whole services list and
f-string stringified it -> `decky3-['sip']`. docker compose saw "no such
service" and the per-decky teardown failed 500.
Flatten: find the matching decky once, then iterate its services. Noop
early on unknown decky_id and on empty service lists. Regression test
asserts the emitted compose args have no '[' or quote characters.
Agents already exposed POST /teardown; the master was missing the plumbing
to reach it. Add:
- POST /api/v1/swarm/hosts/{uuid}/teardown — admin-gated. Body
{decky_id: str|null}: null tears the whole host, a value tears one decky.
On worker failure the master returns 502 and leaves DB shards intact so
master and agent stay aligned.
- BaseRepository.delete_decky_shard(name) + sqlmodel impl for per-decky
cleanup after a single-decky teardown.
- SwarmHosts page: "Teardown all" button (keeps host enrolled).
- SwarmDeckies page: per-row "Teardown" button.
Also exclude setuptools' build/ staging dir from the enrollment tarball —
`pip install -e` on the master generates build/lib/decnet_web/node_modules
and the bundle walker was leaking it to agents. Align pyproject's bandit
exclude with the git-hook invocation so both skip decnet/templates/.
The docker build contexts and syslog_bridge.py lived at repo root, which
meant setuptools (include = ["decnet*"]) never shipped them. Agents
installed via `pip install $RELEASE_DIR` got site-packages/decnet/** but no
templates/, so every deploy blew up in deployer._sync_logging_helper with
FileNotFoundError on templates/syslog_bridge.py.
Move templates/ -> decnet/templates/ and declare it as setuptools
package-data. Path resolutions in services/*.py and engine/deployer.py drop
one .parent since templates now lives beside the code. Test fixtures,
bandit exclude path, and coverage omit glob updated to match.
Agents now ship with collector/prober/sniffer as systemd services; mutator,
profiler, web, and API stay master-only (profiler rebuilds attacker profiles
against the master DB — no per-host DB exists). Expand _EXCLUDES to drop the
full decnet/web, decnet/mutator, decnet/profiler, and decnet_web trees from
the enrollment bundle.
Updater now calls _heal_path_symlink + _sync_systemd_units after rotation so
fleets pick up new unit files and /usr/local/bin/decnet tracks the shared venv
without a manual reinstall. daemon-reload runs once per update when any unit
changed.
Fix _service_registry matchers to accept systemd-style /usr/local/bin/decnet
cmdlines (psutil returns a list — join to string before substring-checking)
so agent-mode `decnet status` reports collector/prober/sniffer correctly.
The bootstrap installer copies etc/systemd/system/*.service into
/etc/systemd/system at enrollment time, but the updater was skipping
that step — a code push could not ship a new unit (e.g. the four
per-host microservices added this session) or change ExecStart on an
existing one. systemctl alone doesn't re-read unit files; daemon-reload
is required.
run_update / run_update_self now call _sync_systemd_units after
rotation: diff each .service file against the live copy, atomically
replace changed ones, then issue a single `systemctl daemon-reload`.
No-op on legacy tarballs that don't ship etc/systemd/system/.
Previously `decnet status` on an agent showed every microservice as DOWN
because deploy's auto-spawn was unihost-scoped and the agent CLI gate
hid the per-host commands. Now:
- collect, probe, profiler, sniffer drop out of MASTER_ONLY_COMMANDS
(they run per-host; master-side work stays master-gated).
- mutate stays master-only (it orchestrates swarm-wide respawns).
- decnet/mutator/ excluded from agent tarballs — never invoked there.
- decnet/web exclusion tightened: ship db/ + auth.py + dependencies.py
(profiler needs the repo singleton), drop api.py, swarm_api.py,
ingester.py, router/, templates/.
- Four new systemd unit templates (decnet-collector/prober/profiler/
sniffer) shipped in every enrollment tarball.
- enroll_bootstrap.sh enables + starts all four alongside agent and
forwarder at install time.
- updater restarts the aux units on code push so they pick up the new
release (best-effort — legacy enrollments without the units won't
fail the update).
- status table hides Mutator + API rows in agent mode.
Agents never run the FastAPI master app (decnet/web/) or serve the React
frontend (decnet_web/) — they run decnet.agent, decnet.updater, and
decnet.forwarder, none of which import decnet.web. Shipping the master
tree bloats every enrollment payload and needlessly widens the worker's
attack surface.
Excluded paths are unreachable on the worker (all cli.py imports of
decnet.web are inside master-only command bodies that the agent-mode
gate strips). Tests assert neither tree leaks into the tarball.
The bootstrap was installing into /opt/decnet/.venv with an editable
`pip install -e .`, and /usr/local/bin/decnet pointed there. The updater
writes releases to /opt/decnet/releases/active/ with a shared venv at
/opt/decnet/venv — a parallel tree nothing on the box actually runs.
Result: updates appeared to succeed (release dir rotated, SHA changed)
but systemd kept executing the untouched bootstrap code.
Changes:
- Bootstrap now installs directly into /opt/decnet/releases/active
with the shared venv at /opt/decnet/venv and /opt/decnet/current
symlinked. Same layout the updater rotates in and out of.
- /usr/local/bin/decnet -> /opt/decnet/venv/bin/decnet.
- run_update / run_update_self heal /usr/local/bin/decnet on every
push so already-enrolled hosts recover on the next update instead
of needing a re-enroll.
- run_update / run_update_self now log each phase (receive, extract,
pip install, rotate, restart, probe) so the updater log actually
shows what happened.
Agents run deckies locally and need to inspect their own state. Removed
`status` from MASTER_ONLY_COMMANDS so it survives the agent-mode gate.
Useful for validating remote updater pushes from the master.
Three holes in the systemd integration:
1. _spawn_agent_via_systemd only restarted decnet-agent.service, leaving
decnet-forwarder.service running the pre-update code (same /opt/decnet
tree, stale import cache).
2. run_update_self used os.execv regardless of environment — the re-execed
process kept the updater's existing cgroup/capability inheritance but
systemd would notice MainPID change and mark the unit degraded.
3. No path to surface a failed forwarder restart (legacy enrollments have
no forwarder unit).
Now: agent restart first, forwarder restart as best-effort (logged but
non-fatal so legacy workers still update), MainPID still read from the
agent unit. For update-self under systemd, spawn a detached sleep+
systemctl restart so the HTTP response flushes before the unit cycles.
Bootstrap used to end with `decnet updater --daemon` which forks and
detaches — invisible to systemctl, no auto-restart, dies on reboot.
Ships a decnet-updater.service template matching the pattern of the
other units (Restart=on-failure, log to /var/log/decnet/decnet.updater.log,
certs from /etc/decnet/updater, install tree at /opt/decnet), bundles
it alongside agent/forwarder/engine units, and the installer now
`systemctl enable --now`s it when --with-updater is set.
The create helpers short-circuited on name alone, so a prior macvlan
deploy left Docker's decnet_lan network in place. A subsequent ipvlan
deploy would no-op the network create, then container attach would try
to add a macvlan port on enp0s3 that already had an ipvlan slave —
EBUSY, agent 500, docker ps empty.
Now: when the existing network's driver disagrees with the requested
one, disconnect any live containers and DROP it before recreating.
Parent-NIC can host one driver at a time.
Also: setup_host_{macvlan,ipvlan} opportunistically delete the opposite
host-side helper so we don't leave cruft across driver swaps.
_DB_RESET_TABLES was missing the swarm tables, so drop-tables mode left
them intact. create_all doesn't alter columns on existing tables, so any
schema change to SwarmHost (like use_ipvlan) never took effect after a
reset. Child FK first (decky_shards -> swarm_hosts).
Wi-Fi APs bind one MAC per associated station, so VirtualBox/VMware
guests bridged over Wi-Fi rotate the VM's DHCP lease when Docker's
macvlan starts emitting container-MAC frames through the vNIC. Adds a
`use_ipvlan` toggle on the Agent Enrollment tab (mirrors the updater
daemon checkbox): flips the flag on SwarmHost, bakes `ipvlan=true` into
the agent's decnet.ini, and `_worker_config` forces ipvlan=True on the
per-host shard at dispatch. Safe no-op on wired/bare-metal agents.
Deckies merged in from a prior deployment's saved state kept their
original host_uuid — which dispatch_decnet_config then 404'd on if that
host had since been decommissioned or re-enrolled at a different uuid.
Before round-robin assignment, drop any host_uuid that isn't in the live
swarm_hosts set so orphaned entries get reassigned instead of exploding
with 'unknown host_uuid'.
tar_working_tree (walks repo + gzips several MB) and detect_git_sha
(shells out) were called directly on the event loop, so /swarm-updates/push
and /swarm-updates/push-self froze every other request until the tarball
was ready. Wrap both in asyncio.to_thread.
systemd daemons run with WorkingDirectory=/ by default; docker compose
derives the project name from basename(cwd), which is empty at '/', and
aborts with 'project name must not be empty'. Pass -p decnet explicitly
so the project name is independent of cwd, and set WorkingDirectory=/opt/decnet
on the three DECNET units so compose artifacts (decnet-compose.yml,
build contexts) also land in the install dir.
POST /deckies/deploy now branches on DECNET_MODE + enrolled host presence:
when the caller is a master with at least one reachable swarm host, round-
robin host_uuids are assigned over new deckies and the config is dispatched
via AgentClient. Falls back to local docker-compose otherwise.
Extracts the dispatch loop from api_deploy_swarm into dispatch_decnet_config
so both endpoints share the same shard/dispatch/persist path. Adds
GET /system/deployment-mode for the UI to show 'will shard across N hosts'
vs 'will deploy locally' before the operator clicks deploy.
Stateless /api/v1/deckies/deploy previously instantiated DecnetConfig with
deckies=[] so it could merge entries later — but DecnetConfig.deckies is
min_length=1, so Pydantic raised and the global handler mapped it to 422
'Internal data consistency error'. Construct the config after
build_deckies_from_ini returns at least one DeckyConfig.
Rename log-file-path -> log-directory (maps to DECNET_LOG_DIRECTORY). Bundle
now ships three systemd units rendered with agent_name/master_host and installs
them into /etc/systemd/system/. Bootstrap replaces direct 'decnet X --daemon'
calls with systemctl enable --now. Each unit pins DECNET_SYSTEM_LOGS so agent,
forwarder, and deckies logs land at decnet.{agent,forwarder}.log and decnet.log
under /var/log/decnet.
Mirrors the agent→forwarder pattern: `decnet swarmctl` now fires the
syslog-TLS listener as a detached Popen sibling so a single master
invocation brings the full receive pipeline online. --no-listener opts
out for operators who want to run the listener on a different host (or
under their own systemd unit).
Listener bind host / port come from DECNET_LISTENER_HOST and
DECNET_SWARM_SYSLOG_PORT — both seedable from /etc/decnet/decnet.ini.
PID at $(pid_dir)/listener.pid so operators can kill/restart manually.
decnet.ini.example ships alongside env.config.example as the
documented surface for the new role-scoped config. Mode, forwarder
targets, listener bind, and master ports all live there — no more
memorizing flag trees.
Extends tests/test_auto_spawn.py with two swarmctl cases: listener is
spawned with the expected argv + PID file, and --no-listener suppresses.
New _spawn_detached(argv, pid_file) helper uses Popen with
start_new_session=True + close_fds=True + DEVNULL stdio to launch a
DECNET subcommand as a fully independent process. The parent does NOT
wait(); if it dies the child survives under init. This is deliberately
not a supervisor — if the child dies the operator restarts it manually.
_pid_dir() picks /opt/decnet when writable else ~/.decnet, so both
root-run production and non-root dev work without ceremony.
`decnet agent` now auto-spawns `decnet forwarder --daemon ...` as
that detached sibling, pulling master host + syslog port from
DECNET_SWARM_MASTER_HOST / DECNET_SWARM_SYSLOG_PORT. --no-forwarder
opts out. If DECNET_SWARM_MASTER_HOST is unset the auto-spawn is
silently skipped (single-host dev or operator wants to start the
forwarder separately).
tests/test_auto_spawn.py monkeypatches subprocess.Popen and verifies:
the detach kwargs are passed, the PID file exists and contains a
valid positive integer (PID-file corruption is a real operational
headache — catching bad writes at the test level is free), the
--no-forwarder flag suppresses the spawn, and the unset-master-host
path silently skips.
- MASTER_ONLY_COMMANDS / MASTER_ONLY_GROUPS frozensets enumerate every
command a worker host must not see. Comment block at the declaration
puts the maintenance obligation in front of anyone touching command
registration.
- _gate_commands_by_mode() filters both app.registered_commands (for
@app.command() registrations) and app.registered_groups (for
add_typer sub-apps) so the 'swarm' group disappears along with
'api', 'swarmctl', 'deploy', etc. on agent hosts.
- _require_master_mode() is the belt-and-braces in-function guard,
added to the four highest-risk commands (api, swarmctl, deploy,
teardown). Protects against direct function imports that would
bypass Typer.
- DECNET_DISALLOW_MASTER=false is the escape hatch for hybrid dev
hosts that legitimately play both roles.
tests/test_mode_gating.py exercises help-text listings via subprocess
and the defence-in-depth guard via direct import.
- decnet/__init__.py now calls load_ini_config() on first import of any
decnet.* module, seeding os.environ via setdefault() so env.py's
module-level reads pick up INI values before the shell had to export
them. Real env vars still win.
- env.py exposes DECNET_MODE (default 'master') and
DECNET_DISALLOW_MASTER (default true), consumed by the upcoming
master-command gating in cli.py.
Back-compat: missing /etc/decnet/decnet.ini is a no-op. Existing
.env.local + flag-based launches behave identically.
- decnet/agent/app.py /health: drop leftover 'push-test-2' canary
planted during live VM push verification and never cleaned up;
test_health_endpoint asserts the exact dict shape.
- tests/test_factory.py: switch the lazy-engine check from
mysql+aiomysql (not in pyproject) to mysql+asyncmy (the driver the
project actually ships). The test does not hit the wire so the
dialect swap is safe.
Both were red on `pytest tests/` before any config/auto-spawn work
began; fixing them here so the upcoming commits land on a green
full-suite baseline.
New decnet/config_ini.py parses a role-scoped INI file via stdlib
configparser and seeds os.environ via setdefault — real env vars still
win, keeping full back-compat with .env.local flows.
[decnet] holds role-agnostic keys (mode, disallow-master, log-file-path);
the role section matching `mode` is loaded, the other is ignored
silently so a worker never reads master-only keys (and vice versa).
Loader is standalone in this commit — not wired into cli.py yet.
The module-level _require_env('DECNET_JWT_SECRET') call blocked
`decnet agent` and `decnet updater` from starting on workers that
legitimately have no business knowing the master's JWT signing key.
Move the resolution into a module `__getattr__`: only consumers that
actually read `decnet.env.DECNET_JWT_SECRET` trigger the validation,
which in practice means only decnet.web.auth (master-side).
Adds tests/test_env_lazy_jwt.py covering both the in-process lazy path
and an out-of-process `decnet agent --help` subprocess check with a
fully sanitized environment.
React component for /swarm-updates: per-host table polled every 10s,
row actions for Push Update / Update Updater / Rollback, a fleet-wide
'Push to All' modal with the include_self toggle, and toast feedback
per result.
Admin-only (both server-gated and UI-gated). Unreachable hosts surface
as an explicit state; actions are disabled on them. Rollback is
disabled when the worker has no previous release slot (previous_sha
null from /hosts).
Adds /api/v1/swarm-updates/{hosts,push,push-self,rollback} behind
require_admin. Reuses the existing UpdaterClient + tar_working_tree + the
per-host asyncio.gather pattern from api_deploy_swarm.py; tarball is
built exactly once per /push request and fanned out to every selected
worker. /hosts filters out decommissioned hosts and agent-only
enrollments (no updater bundle = not a target).
Connection drops during /update-self are treated as success — the
updater re-execs itself mid-response, so httpx always raises.
Pydantic models live in decnet/web/db/models.py (single source of
truth). 24 tests cover happy paths, rollback, transport failures,
include_self ordering (skip on rolled-back agents), validation, and
RBAC gating.
Add deploy/ unit files for every DECNET daemon (agent, updater, api, web,
swarmctl, listener, forwarder). All run as User=decnet with NoNewPrivileges,
ProtectSystem, PrivateTmp, LockPersonality; AmbientCapabilities=CAP_NET_ADMIN
CAP_NET_RAW only on the agent (MACVLAN/scapy). Existing api/web units migrated
to /opt/decnet layout and the same hardening stanza.
Make the updater's _spawn_agent systemd-aware: under systemd (detected via
INVOCATION_ID + systemctl on PATH), `systemctl restart decnet-agent.service`
replaces the Popen path so the new agent inherits the unit's ambient caps
instead of the updater's empty set. _stop_agent becomes a no-op in that mode
to avoid racing systemctl's own stop phase.
Tests cover the dispatcher branch selection, MainPID parsing, and the
systemd no-op stop.
- _run_pip: on first venv use, install decnet with its full dep tree so the
bootstrapped environment actually has typer/fastapi/uvicorn. Subsequent
updates keep --no-deps for a near-no-op refresh.
- run_update_self: do not reuse sys.argv to re-exec the updater. Inside the
live process, sys.argv is the uvicorn subprocess invocation (--ssl-keyfile
etc.), which 'decnet updater' CLI rejects. Reconstruct the operator-visible
command from env vars set by updater.server.run.
If the agent was started outside the updater (manually, during dev,
or from a prior systemd unit), there is no agent.pid for _stop_agent
to target, so a successful code install leaves the old in-memory
agent process still serving requests. Scan /proc for any decnet agent
command and SIGTERM all matches so restart is reliable regardless of
how the agent was originally launched.
